The Sling Adapter Plate is designed to create an attachment point for single or two point slings on weapons that do not have a factory mount. Available for the AR-15/M-16 rifle, Sig Sauer 556 rifle, MP5, and the Remington 870, Benelli M1/M3, and Mossberg 500 series shotgun.

Please note to our customers outside the United States, these adapter plates have been listed under the U.S. Munitions lists. We are awaiting on an export license to ship these outside the U.S. We are sorry for any delay.

Collapsible Stock M-4/AR-15 rifle

We carry several different adapter plates for the M4/CAR style rifle.

Our latest addition to our M4 Adapter plates requires only the removal of the collapsible butt stock. The UM4 adapter plate slides over the buffer tube and fits against the castle nut. It is secured by a screwed pin on the bottom. This adapter plate may interfere with the inner most position of the stock locking in position.

Price: $29.95

Several of our plates replace the factory plate at the rear of the lower receiver. This requires some disassembly of the rifle. We carry three versions of this plate.

Above Plate has a round connector for snap hook type attachment, and a 1 1/4 inch slot for webbing .

Adapter Plate below has only loops. Price: $14.95.

The other plate is designed for right hand shooter only and has one loop on the left side. Price: $14.95

For more information or to order, go here

We now carry the Midwest Industries End Plate Adapter. This adapter fits over the buffer tube of a collapsible stock M-4/AR-15. Installation requires only the removal of the shoulder stock and sliding the adapter over the buffer tube and the castle nut. Tighten the hex nut down with the supplied allen wrench. Re-install the shoulder stock portion to finish.

$35.95

The fixed stock version is available for either right or left handed shooters. The Adapter Plate is 1/4 inch wide and will add this to the length of the stock. A longer screw for the buttstock is supplied. Please specify right or left handed shooter. Price: $34.95

Sig Sauer 556 SWAT Folder Stock

For the Sig Sauer 556 SWAT folding stock we stock an adapter plate that will create a sling mount on the left side of the weapon. This adapter plate will only fit the SWAT or magpul style folder, it will not fit the Classic style. Supplied screw replaces the factory screw because of the added width of the plate. Price: $24.95

Sling Adapter Pin, MP5

THIS ITEM IS TEMPORARILY DISCONTINUED 

For the MP5 sub-machine gun we offer a sling adapter pin

Our Sling Pin replaces the buttstock push pin and places a ring on one side. Opposite side is secured with a thumb nut.

For the full size MP5, will not fit the MP5K model.

Shotgun Adapter Plates

For the Benelli M1/M3/Super 90, Mossberg 500 series and Remington 870 we have adapter plates with a single loop for right or left handed as well as an ambidextrous plate.  These mount between the receiver and stock. The ambi plates are recommended for shotguns with pistol grip stock due to the location of the sling mount may interfere with normal gripping of the standard stock.

SHOTGUN FRONT SLING CONNECTORS

We carry the GGG front sling adapter. This mounts at the front of the tubular magazine, either right or left side, and allows attachment of 2 or 3 point slings. This mounts sling away from the shotgun, allowing space for pump action or light system without interference.

Price: $12.95